Support Questions
Find answers, ask questions, and share your expertise
Announcements
Alert: Welcome to the Unified Cloudera Community. Former HCC members be sure to read and learn how to activate your account here.

Trying to deploy Apache Metron on single node VM, but Ansible and maven dependency failures, please help I am stuck

Solved Go to solution
Highlighted

Trying to deploy Apache Metron on single node VM, but Ansible and maven dependency failures, please help I am stuck

New Contributor

Hi,

I am trying to deploy Apache Metron on a single node VM, but after vagrant up, when I run vagrant provision, it gives me errors on maven dependencies and ansible failed to setup successfully.

I have installed all packages defined for Metron deployment, Ansible 2.0.0.2, Vagrant 1.9.6, Maven 3.3.9, Virtual Box 5.1.30 JDK 1.8 and Python 2.7.5

Also, when I run the command "mvn clean package", metron-config error pops up and it doesnt complete its installation, followed by metron-rest, metron-rest client

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Trying to deploy Apache Metron on single node VM, but Ansible and maven dependency failures, please help I am stuck

Super Collaborator

Hey @Gaurav Bapat, you need not run the mvn command every time. Just once should suffice. Also, if you have used the full-dev vagrant deployment, you need not have to do anything with Ambari UI (or the Step 3 screenshot) you have pasted.

So, let me paraphrase the steps for you so that you can give this a try once more, afresh. Let me know how it goes.

Assumption: Say your metron folder is located at: /user/gaurav/metron

Step 0 - Cleanup all existing deployments:

* Run the following commands:

cd /user/gaurav/metron/metron-deployment/vagrant/full-dev-platform
vagrant destroy -f

* The above destroy command would terminate and delete the existing running VM. You can also run 'VirtualBox' command to launch the application console, and can delete any other stray VMs that are not required.

Step 1 - Compile metron

* Run the following commands:

cd /user/gaurav/metron
mvn clean compile -DskipTests

* The above command will take about 10 mins or so to complete, and should end with a "SUCCESS" message

Step 2 - Bring up metron VM

* Run the following commands:

cd /user/gaurav/metron/metron-deployment/vagrant/full-dev-platform
vagrant up

* The above command will take about 45 mins to over an hour to complete. I would recommend that you disable auto-sleep of the system in case it is enabled.

At the end of the step 2 above, you should be able to see a message saying that the deployment completed successfully.

60 REPLIES 60

Re: Trying to deploy Apache Metron on single node VM, but Ansible and maven dependency failures, please help I am stuck

Super Collaborator

Hi @Gaurav Bapat, can you post the output of running the command metron-deployment/scripts/platform-info.sh ?

I am guessing this could be due to an older version of node and npm modules. Here is the output from my system, for which I am able to get everything working.

Metron 0.4.2
--
* master
--
--
--
ansible 2.0.0.2
  config file =
  configured module search path = Default w/o overrides
--
Vagrant 1.9.4
--
Python 2.7.12
--
Apache Maven 3.3.9 (bb52d8502b132ec0a5a3f4c09453c07478323dc5; 2015-11-10T22:11:47+05:30)
Maven home: /usr/local/Cellar/maven/3.3.9/libexec
Java version: 1.8.0_91, vendor: Oracle Corporation
Java home: /Library/Java/JavaVirtualMachines/jdk1.8.0_91.jdk/Contents/Home/jre
Default locale: en_US, platform encoding: UTF-8
OS name: "mac os x", version: "10.12.6", arch: "x86_64", family: "mac"
--
Docker version 1.12.1, build 23cf638, experimental
--
node
v8.9.1
--
npm
5.5.1
--
Darwin HW12724.local 16.7.0 Darwin Kernel Version 16.7.0: Wed Oct  4 00:17:00 PDT 2017; root:xnu-3789.71.6~1/RELEASE_X86_64 x86_64
--
Total System Memory = 16384 MB
Processor Model: Intel(R) Core(TM) i7-4870HQ CPU
Processor Speed: 2.50GHz
Total Physical Processors: 4
Total cores: 4
Disk information:
/dev/disk1     465Gi  402Gi   63Gi    87% 2338554 4292628725    0%   /
/dev/disk3s1    96Mi   94Mi  1.7Mi    99%      12 4294967267    0%   /Volumes/VirtualBox
/dev/disk4s1    99Mi   97Mi  1.6Mi    99%      12 4294967267    0%   /Volumes/VirtualBox 1
This CPU appears to support virtualization

Re: Trying to deploy Apache Metron on single node VM, but Ansible and maven dependency failures, please help I am stuck

New Contributor

When I run vagrant provision, it gives me metron-config error, I ran mvn clean package command in metron-config folder but it fails to build metron-config and others successfully, please help or is the files in the tar corrupt?

@asubramanian

Re: Trying to deploy Apache Metron on single node VM, but Ansible and maven dependency failures, please help I am stuck

Super Collaborator

Can you please run these steps and paste the output?

1. cd to the directory Metron top level directory (E.g. cd /home/user1/metron)

2. Run ./metron-deployment/scripts/platform-info.sh

Re: Trying to deploy Apache Metron on single node VM, but Ansible and maven dependency failures, please help I am stuck

New Contributor
Metron 0.4.1
fatal: Not a git repository (or any parent up to mount point /home)
Stopping at filesystem boundary (GIT_DISCOVERY_ACROSS_FILESYSTEM not set).
--
ansible 2.0.0.2
  config file = 
  configured module search path = Default w/o overrides
--
Vagrant 1.9.6
--
Python 2.7.5
--
Apache Maven 3.3.9 (bb52d8502b132ec0a5a3f4c09453c07478323dc5; 2015-11-10T11:41:47-05:00)
Maven home: /usr/local/maven/apache-maven-3.3.9
Java version: 1.8.0_151, vendor: Oracle Corporation
Java home: /usr/lib/jvm/java-1.8.0-openjdk-1.8.0.151-1.b12.el7_4.x86_64/jre
Default locale: en_US, platform encoding: UTF-8
OS name: "linux", version: "3.10.0-693.el7.x86_64", arch: "amd64", family: "unix"
--
Docker version 1.12.6, build 85d7426/1.12.6
--
node
v6.12.0
--
npm
3.10.10
--
Linux metron.sequretek.com 3.10.0-693.el7.x86_64 #1 SMP Tue Aug 22 21:09:27 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux
--
Total System Memory = 9672.71 MB
Processor Model: Intel(R) Core(TM) i3-2120 CPU @ 3.30GHz
Processor Speed: 3291.748 MHz
Total Physical Processors: 2
Total cores: 2
Disk information:
/dev/mapper/centos-root   50G   19G   31G  38% /
/dev/sda1               1014M  179M  836M  18% /boot
/dev/mapper/centos-home   65G  8.6G   56G  14% /home
/dev/sr0                 4.3G  4.3G     0 100% /run/media/gbapat/CentOS 7 x86_64
This CPU appears to support virtualization

@asubramanian Thanks

Re: Trying to deploy Apache Metron on single node VM, but Ansible and maven dependency failures, please help I am stuck

Super Collaborator

Sure.. you can follow these commands as per your OS - https://www.tecmint.com/install-nodejs-npm-in-centos-ubuntu/.

Please retry compiling Metron once you have upgraded the node. npm and let me know if it fixes the issue.

Re: Trying to deploy Apache Metron on single node VM, but Ansible and maven dependency failures, please help I am stuck

New Contributor

It gives Skipping Ansible version error still

Re: Trying to deploy Apache Metron on single node VM, but Ansible and maven dependency failures, please help I am stuck

New Contributor

after i run vagrant provision, this happens42766-capture12.jpgThanks @asubramanian

Re: Trying to deploy Apache Metron on single node VM, but Ansible and maven dependency failures, please help I am stuck

New Contributor

42768-capture13.jpg

@asubramanian Is it going good and what time will it take to complete?

Re: Trying to deploy Apache Metron on single node VM, but Ansible and maven dependency failures, please help I am stuck

New Contributor

42770-capture17.jpg

@asubramanian Why this no hosts matched? and I am so thankful that you helped me do this, Thanks alot!!