The purpose of this article is to provide the steps needed to create your own certificates for securing your NiFi instance(s). The article will also cover creating your own Certificate Authority (CA) that you can use to sign all the certificates you create. This article is not intended to be a best practices guide to creating secure keys. While we will provides tips, users should carefully research the various security options available when creating keys. This procedure assumes you have Java Keytool and OpenSSL installed on your system. HDF 1.x or Apache NiFi 0.x Secured UI: HDF 2.x or Apache NiFi 1.x Secured UI: Creating your Certificate Authority: You only need to create one CA, which you will use to sign the keys for every one of your servers/VMs and users (You only need to create keys for users if your NiFi has not been configured to use LDAP authentication). What is a CA? The CA acts as a trusted entity for validating the authenticity of certificates. The CA is used to certify the authenticity of the keys (server and user) you create and should be carefully protected. User should read the following wiki on CAs for a more detailed description: https://en.wikipedia.org/wiki/Certificate_authority Commands for creating a CA: *** Users should use strong passwords whenever prompted. When working with Java keystores, it is recommended that both the key password and the keystore password match. *** NOTE: Security requirements are more stringent as newer versions of browsers and NiFi are being used since this article was originally written. The below command should be changed to use "-aes256". ***You must type 'yes' to trust this certificate. The following command can be used to do a verbose listing of the contents of the above created keystore: keytool -v -list -keystore truststore.jks At the end of the above you will have your "truststore" file (truststore.jks) that you will use in your nifi.properties file. Use this same "truststore" file on every one of your servers/VMs. You may also choose to load the rootCA.der or rootCA.pem key into your browser as another authority. This is not required, but without this authority loaded you will need to add a certificate exception when you try to access the NiFi https URL. Edit the following lines in your nifi.properties file: nifi.security.truststore=/<path to certs>/truststore.jks nifi.security.truststoreType=JKS nifi.security.truststorePasswd=<MyTruststorePassord> nifi.security.needClientAuth=true Creating your Server Keystore: Now lets create a server/vm key and get it signed by that CA: *** Users should use strong passwords whenever prompted. When working with Java keystores, it is recommended that both the key password and the keystore password match. The following procedure will [1] create your server/VMs private key, [2] Generate a Certificate Signing Request (.csr), [3] Use CSR to get your key signed by your CA using the CAs private key, [4] Import the public key for your CA in to your keystore, and [5] Import your signed certificate (.crt) in to your keystore to form the complete trusted chain. At the end of the above you will have your "keystore" file (nifi-server1.jks) that you will use in your nifi.properties file for one of your servers/VMs. You will need to repeat the above steps for each of your other servers/VMs so they each use their own keys. Now keep in mind that I am using “nifi-server1" in this example, but you will most likely use your systems/VMs hostnames (shortname as alias and FQDN as CN). I also highly recommend that you use the same key and keystore password for every key you create if creating keys for multiple nodes in a NiFi cluster. The following lines need to be edited in the nifi.properties file: nifi.security.keystore=/<path to your certs>/nifi-server1.jks nifi.security.keystoreType=JKS nifi.security.keystorePasswd=<yourkeystorePassword> nifi.security.keyPasswd=<yourKeyPassword> Also make sure that you set the following property in the nifi.properties file to true: nifi.security.needClientAuth=true Additional configurations for NiFi clusters only: When working with a NiFi cluster, it is recommended that you change the default NiFi user authority provider. The default is file-provider. On your NCM you should change file-provider to cluster-ncm-provider and on your nodes file-provider should be changed to cluster-node-provider. nifi.security.user.authority.provider= You will also need to edit the authority-providers.xml file to configure both of these new providers. Remove the comments ( “<!--“ and “-->” ) surrounding the section of XML associated to the provider you are enabling: Example NCM provider configuration: Example Node provider configuration: Creating User Keys for key based authentication: Now that you have all the keys you need for the systems in your cluster, you will need to create some keys for your users to load into their web browsers in order to securely access your NiFi. This step is not necessary if you have setup your NiFi to use LDAP for user authentication. This is done in much of the same way as you created your server keys: *** Users should use strong passwords whenever prompted. Now you have a p12 file for user1, they can load this in to their browser certs to use to authenticate against your secure NiFi. Import your <user1>.p12 file in to your certificates for your preferred browser. --------- HDF 1.x or Apache NIFi 0.x only: Now remember you must manually add that first "ROLE_ADMIN" user to the authorized-users.xml file. So you will need the DN from the user key you created for this Admin user and add it in to your Authorized-users.xml file. --------- HDF 2.x or Apache NiFi 1.x only: You must configure your "Initial Admin Identity" in the authorizers.xml file. That Initial Admin Identity value must match the user's DN from the .p12 file exactly. --------- Here is an example of what it may look like: dn="EMAILADDRESS=none@none.com, CN=<user1>, OU=NiFi, O=someplace, L=Baltimore, ST=Maryland, C=US" Troubleshooting authentication issues: If you have the DN format wrong in your authorized-users.xml file, rather then gaining access to the NiFi you will get prompted to "request access”. Do not click the request access link. You must instead go fix the DN in the authorized-users.xml file. You need to create that first admin account that can approve those requests. If you click request access, you will need to stop your NiFi and delete the nifi-users.h2.db file (located inside the database_repository directory), otherwise, even fixing your authorized-usesr.xml file will not gain you access because your account will be stuck in a pending auth state. You can look at the request that came in in the nifi-users.log to get the exact DN pattern to fix your authorized-usesr.xml file entry: You should see something that looks like this: INFO [NiFi Web Server-58023] o.a.n.w.s.x509.X509AuthenticationFilter Attempting request for (<CN=JohnDoe, OU=MyBusiness, O=MyOrg, L=Baltimore, ST=MD, C=US>) GET... That log line gives you the exact format of the DN that needs to be updated/added to the authorized-users.xml file. Example below: <user dn="CN=John Doe, OU=MyBusiness, O=MyOrg, L=Baltimore, ST=MD, C=US"> <role name="ROLE_DFM"/> <role name="ROLE_ADMIN"/> <role name="ROLE_PROVENANCE"/> </user> ... View more

The purpose of this article is to explain what Process Groups and Remote Process Groups (RPGs) are and how input and output ports are used to move FlowFiles between them. Process groups are a valuable addition to any complex dataflow. They give DataFlow Managers (DFMs) the ability to group a set of processors on to their own imbedded canvas. Remote Process groups allow a DFM to treat another NiFi instance or cluster as just another process group in the larger dataflow picture. Simply being able to build flows on different canvases is nice, but what if I need to move NiFi FlowFiles between these canvases? This is where input and output ports come in to play. They allow you move FlowFiles between these canvases that are either local to a single NiFi or between the canvases of complete different NiFi instances/clusters. Embedded Process Groups: Lets start by talking about the simplest use of multiple embedded canvases through process groups. When you started NiFi for the very first time you are given a blank canvas. This blank canvas is noting more then a process group in itself. The process group is referred to as the root process group. From there you are able to add additional process groups to that top-level canvas. These added process groups allow you drill down in to them giving additional blank canvases you could build dataflows on. When you enter a process group you will see the hierarchy represented just above the canvas in the UI ( NiFi Flow >> Process Group 1 ). NiFi does not restrict the number of process groups you can create or the depth you can go with them. You could compare the process group hierarchy to that of a Windows directory structure. So if you added another process group inside one that you already created, you would essentially now have gone two layers deep. ( NiFi Flow >> Process Group 1 >> Process Group 2 ). The hierarchy represented above you canvas allows you to quickly jump up one or more layers all the way to the root level by simply clicking on the name of the process group. While you can add any number of process groups at the same embedded level, the hierarchy is only shown from root down to the current process group you are in. Now that we understand how to add embedded process groups, lets talk about how we move data in and out of these process groups. This is where input and output ports come in to play. Input and output ports exist to move FlowFIles between a process group andONE LEVEL UPfrom that process group. Input ports will accept FlowFiles coming from one level up and output ports allow FlowFiles to be sent one level up. If I have a process group added to my canvas, I cannot drag a connection to it until at least one input port exists inside that process group. I also cannot drag a connection off of that process group until at least on output port exists inside the process group. You can only move FlowFiles up or down one level at a time. Given the example of a process group within another process group, FlowFiles would need to be moved from the deepest level up to the middle layer before finally being able to be moved to the root canvas. In the above example I have a small flow pushing FlowFiles into an embedded process group (Process Group 1) and also pulling data from the same embedded process group. As you can see, I have created an input and output port inside Process Group 1. This allowed me to draw a connection to and from the process group on the root canvas layer. You can have as many different input and output ports inside any process group as you like. When you draw the connection to a process group, you will be able to select which input port to send the FlowFiles to. When you draw a connection from a process group to another processor, you will be able to pick which output port to pull FlowFiles from. Every input and output port within a single process group must have a unique name. NiFi validates the port name to prevent this from happening. Remote Process Groups: We refer to the ability to send FlowFiles between different NiFi instances as Site-to-Site. Site-to-Site is configured very much in the same way we just configured moving files between embedded process groups on a single NiFi instance. Instead of moving FlowFiles between different process groups (layers) within the same NiFi, we are moving FlowFiles between different NiFi instances or clusters. If a DFM reaches a point in their dataflow where they want to send data to another NiFi instance or cluster, they would add a Remote Process Group (RPG). These Remote Process Groups are not configured with unique system port numbers, but instead all utilize the same Site-to-Site port number configured in your nifi.properties files. I will not be covering the specific NiFi configuration needed to enable site-to-site in this article. For information on how to enable and configure Site-to-Site on a NiFi instance, see the Site-to-Site Properties section of the Admin Guide. Lets take a quick look at how these two components differ: As I explained earlier, input and output ports are used to move FlowFiles one level up from the process group they are created in. At the top level of your canvas (root process group level) adding input or output ports provides the ability for that NiFi to receive (input port) FlowFiles from another NiFi instance or have another NiFi pull files from (output port) that NiFi. We refer to input and output ports added the top level as remote input or output ports. While the same input and output icon in the UI is used to add both remote and embedded input and output ports, you will notice that they are rendered differently when added to the canvas. If your NiFi has been configured to be secure (HTTPS) using server certificates, the remote input/output port’s configuration windows will have an “Access Control” tab where you must authorize which remote NiFI systems are allowed to see and access these ports. If not running secure, all remote ports are exposed and accessible by any other NiFi instance. In single instance you can send data to an input port inside a process group by dragging a connection to the process group and selecting the name of the input port from a selection menu provided. Provided that the remote NiFi instance has input ports exposed to your NiFi instance, you can drag a connection to the RPG much in the same way you previously dragged a connection to the embedded process groups within a single instance of NiFi. You can also hover over the RPG and drag a connection off of the RPG, which will allow you to pull data from an available output port on the target NiFi. The Source NiFi (standalone or cluster) can have as many RPGs as a DFM would like. You can have multiple RPGs in different areas of your dataflows that all connect to the same remote instance. While the target NiFi contains the input and output ports (Only Input and output ports added to root level process group can be used for Site-to-Site Flowfile transfers). When sending data between two standalone NiFi instance the setup of your RPG is fairly straight forward. When adding the RPG, simply provide the URL for the target instance. The source RPG will communicate with the URL to get the Site-to-Site port to use for FlowFile transfer. When sending FlowFiles via Site-to-Site to a NiFi that is a NiFi cluster we want the data going to every node in the cluster. The Site-to-Site protocol handles this for you with some additional load-balancing benefits built in. The RPG is added and configured to point at the URL of the NCM. (1)The NCM will respond with the Site-to-Site port for the NCM. (2) The source will connect to the Site-to-Site port of the NCM which will respond to the source NiFi with the URLs, Site-to-Site port numbers, and current loads on every connected node. (3) The source NiFi will then load-balance FlowFile delivery to each of those nodes giving fewer FlowFiles to nodes that are under heavier load. The following diagram illustrates these three steps: A DFM may choose to use Site-to-Site to redistribute data arriving on a single node in a cluster to every node in that same cluster by adding a RPG that points back at the NCM for that cluster. In this case the source NiFi instance is also one of the target NiFi instances. ... View more

**** This article only pertains to HDF 1.x or Apache NiFi 0.x baseline versions. HDF 2.x+ and Apache NiFi 1.x went through a major infrastructure change in the NiFi core. Converting a Standalone NiFi instance into a NiFi Cluster The purpose of this article is to cover the process of taking standalone NiFi instance and converting it into a NiFi cluster. Often times as a NiFi user we start simple by creating a new dataflow on a single installed instance of NiFi. We may find ourselves doing this to save on resources during the build and test phase or because at the time a single server or VM provide all the resources required. Later we want to add in the fault tolerance that a NiFi cluster provides or resources become constrained as our dataflow grows requiring additional resources that a NiFi cluster also provides. It is possible to take all that work done on that single Instance and convert it for use in NiFi Cluster. Your single NiFi instance could easily become one of the attached Nodes to that cluster as well. The “work” I am referring to would be the actual dataflow design you implemented on the NiFi graph/canvas, any controller-services or reporting tasks you created, and all the templates you created. There are some additional considerations that will also be covered in this article that deal with file/resource dependencies of your NiFi installation. This article will not cover how to setup either NiFi Nodes or the NiFi Cluster Manger (NCM). It will simply explain what steps need to be done to prepare these items for installation in to a NiFi cluster you have already setup but have not started yet. The biggest difference between a NCM and node or standalone instance is where each stores its flow.xml and templates. Both standalone instances and cluster nodes rely on a flow.xml.gz file and a templates directory. The NCM on the other hand relies only on a flow.tar file. Since the NCM is the manager of the NiFi cluster, it will need to have its flow.tar created before it can be started or you will end up starting up with nothing on your graph/canvas. The flow.xml.gz file: Your existing standalone NiFi instance will have a flow.xml.gz file located in the conf directory (default configuration) of your NiFi software installation. If it is not found there, you can verify the location it was changed to by looking in the nifi.properties file. This file is by far the most important file in your NiFi instance. The flow.xml.gz file will include everything that you have configured/added to the NiFi graph/canvas. It will also include any and all of your configured controller-services and reporting-tasks created for your NiFi. The flow.xml.gz file is nothing more then a compressed xml file. The NCM of your NiFi cluster does not use a flow.xml.gz file but rather relies on the existence of a flow.tar file. So you can’t just copy the flow.xml.gz file from your standalone instance into the conf directory of your NCM and have everything work. The flow.tar consists of several files: The good news is while we do need to create the flow.tar, we do not need to create all of the files that go inside of it. NiFi will create the missing pieces for you. All we need to do is get your flow.xml inside a tar named flow.tar. You can so this by following the below procedure: 1.Get a copy of your flow.xml.gz file from your standalone instance. 2.Uncompress it using the gunzip command: gunzip flow.xml.gz 3.Tar it up using the tar command: tar –cvf flow.tar flow.xml Now you have your flow.tar needed for your NiFi cluster NCM. What about any templates I created on my standalone instance? How do I get them loaded in to my NCMs flow.tar file? The TEMPLATES directory: If you created templates on your standalone instance, you will need to import those it to your cluster after it is running and has at least one connected node. If you do not have any templates, this section of the guide can be skipped. On your standalone NiFi instance there is a templates directory located inside the conf directory (default configuration). It will contain an xml file ending with .template for every template you created. These files cannot be just placed inside the flow.tar file like we did with the flow.xml. The templates.xml file inside the flow.tar is not actually xml but rather a binary file. You can either use a custom java jar to create that binary templates.xml file or you can import these manually later after your cluster is up and running. So make sure you save off a copy of your templates directory since you will need it no matter which path you choose. Option 1: (Use custom java code to create binary templates.xml file) Copy the attached java jar file (templates.jar.tar.gz) to the system containing the saved off templates directory from your standalone instance. Unpack the file using the command: tar -xvzf templatejar.tar.gz templatejar.tar.gz Run the following command to create the templates.xml file: java -cp template.jar combine <path to templates dir>/* * note the star, it needs a list of files, not just a directory. ** It will create a templates.xml file in the current directory Take the templates.xml file created and add it to the flow.tar file you already created using the following command: tar –rvf flow.tar templates.xml Place this flow.tar file in the conf directory of your NCM instance. Option 2: (Manually add templates after Cluster is running) Once you have your NiFi cluster up and running, you can import each template from the saved off templates directory just like you would import any other template shared with you. Click on the templates icon in the upper right corner of the UI. Select the button in the upper right. Select one of the xxxx.template files you saved off. Select the button to import the file. The file will be put inside the flow.tar and placed in the templates directory on each of your nodes Repeat steps 2 – 4 for every, template file. What about the controller-services and reporting-tasks I created on my standalone instance? Controller-services and Reporting-tasks At the beginning I mentioned how your flow.xml.gz file contained any controller services and/or reporting tasks you may have created through the UI. Then a little later I show you that the flow.tar has separate controller-services.xml and reporting-tasks.xml files in it. The flow.xml used to create your flow.tar still has this information; in fact that is where it still needs to be. These two xml files in the flow.tar are where any controller services or reporting tasks you create in the UI for the “Cluster Manager” specifically will be kept. All the reporting tasks and controller service in the flow.xml will run on every node in your cluster. There may be controller services that you originally created on your standalone instance that make better sense running in the NCM now that you are clustered. You can create new “Cluster Manager” controller services and delete the “node” controller services after your NiFi cluster is running. The following controller services should be run on the “Cluster Manager”: -DistributedMapCacheServer -DistributedSetCacheServer There are also controller services that may need to run on both nodes and your NCM. The following is a good example: -StandardSSLContextService Some other controller services that run on the NCM may need this service to function if they are configured to run securely using SSL. Bottom line here is nothing needs to be done before your NiFi cluster is started with regards to either controller services or reporting tasks. Now for the good news… How does my existing standalone instance differ from a node in my new NiFi cluster? Standalone NiFi versus Cluster Node You now have everything needed to get your NCM up running with the templates and flow from your standalone NiFi. What do I do with my standalone instance now? Structurally, there is no difference between a standalone NiFi instance and a NiFi Node. A Standalone instance can easily become just another node in your cluster by configuring the clustering properties at the bottom of its nifi.properties file and restarting it. In fact we could just use this standalone instance to replicate as many nodes as you want. There are a few things that you need to remember when doing this. Some will apply no matter what while others depend on your specific configuration: The things that always matter: Every node must have it own copy of every file declared in any processor, controller-service or reporting task. For example some processors like MergeContent allow you to configure a Demarcation file located somewhere on your system. That file would need to exist in the same directory location on every Node. Every Node must have its nifi.properties file updated so that the following properties are populated with unique values for each node: nifi.web.http.host= or nifi.web.https.host= (if secure) Every Node must have the same value as the NCM for the following nifi.properties property: nifi.sensitive.props.key= *** This value must match what was used on your standalone instance when the flow was created. This value was used to encrypt all passwords in your processors. NiFi will not start if it cannot decrypt those passwords. If the NCM exists on the same system as one of your Nodes (common practice since NCM is a light weight NiFi instance) NCM and Node on same machine cannot share any ports numbers. They must be unique in the nifi.properties files. The things that might matter: If your NiFi is configure to run securely (https) or you are using the StandardSSLContextService, there are some additional considerations since the same identical dataflow runs on every node. SSL based controller services: Every server/VM used for a NiFi cluster is typically assigned its own server certificate that is used for SSL authentication. We have to understand that in a cluster every Node is running the exact same dataflows and controller services. So for example if you have a StandardSSLContextService configure to use a keystore located at /opt/nifi/certs/server1.jks with password ABC, every Node will expect to find a server1.jks file in the same place on each server and that the password is ABC. Since each system gets a unique certificate, how do we work around this issue? We cannot work around the password issue, so every certificate and keystore must be created using the same password. However, every key can be unique. We can create a symbolic link that maps a generic keystore name to the actual keystore on each system System1: keystore.jks à /opt/nifi/certs/server1.jks System2: keystore.jks à /opt/nifi/certs/server2.jks And so on…. We can now configure our StandardSSLContextService to use keystore.jks and the matching password that every keystore/certificate was created with. Modify security settings in each nodes nifi.properties file. The nifi.properties file on every node will need to have the keystore and truststore properties modified to point to the particular nodes keystores and truststores. In addition the authority provider will need to be changed. In a standalone NiFi instance the authority provider specified by the property nifi.security.user.authority.provider= is set to file-provider. In a secure cluster, the NCM should be set to cluster-ncm-provider while each of the nodes should have it set to cluster-node-provider. Making these changes will also require modifying the associated authority-providers.xml file. Modify the authority-providers.xml file: The Authority-providers.xml file is where you configure both the cluster-ncm-provider and the cluster-node-provider. There will already be commented out sections in this fie for both. The cluster-ncm-provider will need to be configured to bind to port and told where to find your authorized-users.xml file (this file should have been copied from your standalone instance). The cluster-node-provider simply needs to be configured with the same port number used for the ncm provider above. Summary: The above process may sound very involved, but it really isn’t that bad. We can sum up these steps in the following high-level checklist: The conversion checklist: Save off all the templates you may have created on your standalone instance. Create flow.tar using flow.xml.gz from your standalone instance. If you have templates, use provided templates.jar to convert them for inclusion in the above flow.tar file Configured NCM and all Nodes nifi.properties file security properties section with same value for nifi.sensitive.props.key, unique keystores, and proper nifi.security.user.authority.provider. All processors, controller-services, and reporting-tasks file dependencies exist in same directory paths on every Node. Use symbolic links so that all keystores/truststores have identical filenames on every node. (If using SSL enabled controller-services or processors) Use same keystore/truststore passwords on every Node. (If using SSL enabled controller-services or processors) After the cluster is running, import each of the saved off templates (only necessary if you did not use templates.jar to create templates.xml file) ... View more

This is part 2 of the fault tolerance tutorial. Part 1 can be found here: https://community.hortonworks.com/articles/8607/ho... -------------------------------------------------------------------------------------------------------------------------------------- Multi-Cluster Fault Tolerance (One cluster in each zone) (All Clusters Active all the time) Multiple clusters can be setup across multiple zones and all are active at the same time. This option requires some external process to keep flows in sync across all clusters. Lets take a look at what this setup might look like if we had 3 zones all running a NiFi cluster. We can see right away that there is a lot more involved with the S2S configuration between the sources systems and these multiple zones. Towards the beginning of this guide we showed what a typical NiFi S2S setup might look like on a source NiFi. With this configuration the sources would need to be setup differently. Rather than delivering data to the Nodes of a single cluster, as we have done in all the other configurations so far, we will need to distribute delivery to all three of our clusters in this configuration. Each of the clusters operates independently of one another. They do not share status or FlowFile information between them. In this configuration, data will only stop flowing to one of the clusters if one of the following is true: 1.The NCM for that cluster reports no nodes available. a.This can happen if all nodes are down, but the NCM is still up. b.Or NCM has marked all Nodes as disconnected due to lack of heartbeats. 2.None of the Nodes in the cluster can be communicated with over the S2S port to deliver data. 3.None of the nodes are accepting data because the destination is full or backpressure has disabled the input ports on all nodes. The following image shows how a source NiFi would be setup to do this load distribution to three separate clusters running in your different zones. The DistributeLoad Processor would be configured as follows: The “Number of Relationships” value should be configured for the number of clusters you will be load-balancing your data to. Each relationship will be used to establish the connection with those clusters. If setup correctly, data will be spread across all the NiFi clusters running in all three zones. Should any zone become unreachable completely (no Nodes reachable), data will queue on the connection to that RPG until the backpressure object threshold configured on that connection is reached. At that time all new data will only be distributed to the connections still accepting files for the other zones. Lets take a look at a couple different scenarios: Scenario 1: Zone Partial Outage In this scenario we will take a look at what happens when connectivity to the NCM and one node in Zone B is lost. In the above scenario the NCM went down before it marked the first Node as disconnected so the source systems will still try to push data to that down node. That will of course fail so the source will try a different node within Zone B. Had the node been marked disconnected before the NCM went down, the source systems would only know about the two still connected nodes and only try delivering to them. The remaining reachable nodes in Zone B’s cluster now take on more data because of the lost node. Data distribution to the nodes in the clusters located in the remaining Zones are unaffected. What if you lost two nodes? The last node in Zone B’s cluster would then receive all the data for that cluster. (33.3% to Zone A, 33.3% to zone B, and 33.3% to Zone C) Remember that the clusters in each of the Zones do not talk to one another so that distribution of data from the sources does not change. We can however design a flow to make sure this use case does not cause us problems. Immediately following the input port (Input ports are used to receive data via S2S) on the dataflow in every one of our Zone’s cluster, we need to add a ControlRate processor. *** Penalty duration on ControlRate processor should be changed from 30 to 1 sec. In the NiFi version (0.4.1) available at the time of writing this, there is a bug that can affect the processors configured rate. (reported in https://issues.apache.org/jira/browse/NIFI-1329 ) Changing the penalty duration gets us around this bug. Remember that because this is a cluster, the same flow exists on every Node. We can then configure this ControlRate processor to allow only a certain amount of data to pass through it based on a time interval. So if it were set to 1000 Flowfiles/sec, the 3 node cluster would allow a max of 3000 Flowfiles/sec to flow through the processors. If we then set backpressure on the connection between the input port and this ControlRate processor, we can effectively stop the input port if the volume suddenly becomes too high. This will then trigger data to start to queue up on our source. If you remember, backpressure was also set on those source connections. That forces the sender to send more data to the other two clusters, keeping this degraded cluster from becoming overwhelmed. We can see below what that would look like on the sending NiFi if the Zone B cluster became degraded. Backpressure is being applied at times on zone B’s connection, so more data is going to zone A and zone C. Every time that backpressure is applied more data is going to the Zone A and Zone C clusters. Backpressure kicks in on Zone B’s connection when the input port on the Zone B cluster nodes stop accepting data because of the control rate configuration. You can see that data is still flowing to Zone B, but at a lower rate. Scenario 2: Complete Outage of Zone In this scenario we have a complete outage of one of our zones. The overall behavior is very close to what we saw in scenario 1. Lets assume we lost Zone C completely. As we have already learned, depending on the order in which the NiFi cluster in Zone C went down, the source NiFi(s) may or may not be still trying to send data to the nodes in this cluster via S2S. Either way with a complete outage, no data will be sent and will begin to queue on the connection feeding the RPG for Zone C on the sending NiFis. Backpressure being set on that connection is very important to make sure the data queue does not continue to grow and grow. There is no failover mechanism in S2S when all Nodes are down to cause this queued data to redirect somewhere else such as another RPG. So this data will remain in this queue until either the queue itself is manually redirected or the down cluster is returned to service. As we can see in the above, no files are sending to Zone C and backpressure has kicked in on the connection feeding the Zone C RPG. As a result all data is being load balanced to Zone A and Zone B with the exception of the 100 files stuck in Zone C’s connection. Manual intervention would be required by a DFM to re-route these 100 files. They will of course transfer to Zone C on their own as soon as it comes back online. Just like the first two configurations, this configuration has its pros and cons. PROs: 1.Losing one does not have impact on being able to access the NCM of the other two zones. So monitoring of the dataflow on the running clusters is still available. 2.Cluster communications between nodes and NCM are not affected by cross-domain network latency. 3.Each zone can scale up or down with out needing to interface with source NiFis sending data via S2S. 4.No DNS changes are required. CONs: 1.Some burden of setting up load balancing falls back on the Source NiFis when using S2S. Source NiFis will need to setup a flow designed to spread data across each of the destination clusters. 2.There is no auto failover of data delivery from one zone to another. Manual intervention is required to redirect queues feeding down zones. 3.Dataflows must be managed independently on the cluster in each zone. There is no manager of managers that can make sure a dataflow is kept in sync across multiple clusters. 4.Changes are made directly on each cluster, the flow.tar (on NCM) and flow.xml.gz (on Nodes) is not interchangeable between clusters. They may appear the same; however, component IDs for each of the processors and connections will differ. This type of deployment is best suited for when the flow is static across all clusters. In order to keep the dataflow static, it would typically be built on a development system and then deployed to each cluster. In this configuration, changes to the dataflow, directly on the production clusters would not be common practice. ... View more