Our Community is getting an upgrade! To get everything ready for the relaunch, we’ll be placing the site in read-only mode starting September 21st.
We really appreciate your understanding while we get things set up behind the scenes. Catch up on all the exciting details about the move here.
Need help or have questions? Drop us a line at [email protected]
Created on
01-12-2016
06:20 PM
- last edited on
04-21-2026
06:55 AM
by
GrazittiAPI
Hi,
If I run below query in Hue UI, it runs successful, but in beeline CLI it fails saying missing 'EOF'
use DB_xxx;
SET hive.execution.engine=tez;
SET hive.vectorized.execution.enabled=true;
SET hive.vectorized.execution.reduce.enabled= true;
SET hive.cbo.enable=true;
SET hive.stats.fetch.partition.stats=true;
SET hive.auto.convert.join=true;
SET hive.auto.convert.join.noconditionaltask.size=25000000;
SET hive.compute.query.using.stats=true;
SET hive.stats.fetch.column.stats =true;
insert into table db_xgl77sar.orc_claiminfo
select
CONCAT(CLAIMNUMBER,'-',EXP_NUMBER) AS EXP_ID,
Claimant_Age,
Case
when Claimant_Age >=0 and Claimant_Age < 3 then 'Infants'
when Claimant_Age >=3 and Claimant_Age < 8 then 'Preschoolers'
when Claimant_Age >=8 and Claimant_Age < 15 then 'General Schoolchildren'
when Claimant_Age >=15 and Claimant_Age < 25 then 'Teens'
when Claimant_Age >=25 and Claimant_Age < 40 then 'Young People'
when Claimant_Age >=40 and Claimant_Age < 60 then 'Mature Age People'
when Claimant_Age >=60 and Claimant_Age < 80 then 'Older People'
when Claimant_Age >=80 then 'Long-lived'
else 'N/A' END AS Claimant_Age_Group,
DATEDIFF(to_date(EXP_ORIGINAL_CLOSE_DATE),to_date(CLAIM_REPORT_DATE)) AS Rpt2Clsd,
case
when TOTAL_LOSS_ID is null then '0'
else '1'
end AS TOTAL_LOSS,
Claimnumber,
INCIDENT,
EXP_NUMBER,
Claim_Report_Date,
to_date(Date_of_Loss) As Date_of_Loss,
Claim_Close_Date,
EXP_ORIGINAL_CLOSE_DATE,
EXP_CLOSEDATE,
EXP_REOPENDATE,
EXP_REOPENREASON,
Description,
Insured_Lability,
ACCIDENT_TYPE,
FAULT_RATING,
LOSS_CAUSE,
LOSS_TYPE,
LINE_OF_BUSINESS,
JurisdictionState,
LOSS_STATE,
POLICY_STATE,
SIU_STATUS,
CLAIMANT_NAME,
TO_DATE(CLAIMANT_DOB) as CLAIMANT_DOB,
CLAIMANT_GENDER,
CLAIMANT_MARITAL_STATUS,
CLAIMANT_OCCUPATION,
EXP_STATUS,
EXP_TYPE,
EXP_Coverage,
COMPENSABILITYCOMMENTS,
HitandRun,
TOTAL_LOSS_ID,
VEHICLE_STYLE,
Ambulance_Used,
Death_Date,
DisabledDueToAccident,
General_Injury_Type,
Impairment,
InjuredCheck_AAA,
Detailed_Body_Part,
Detailed_Injury_Type,
Pre_Exist_Cond,
case
when LOSS_STATE=POLICY_STATE then '1'
else '0'
end PSEQLS,
Date_of_Loss AS DOL_DAY,
case
when EXP_REOPENDATE is null then '0'
else '1'
end AS Reopened,
case
when Death_Date is null then '0'
else '1'
end AS DEATH,
from_unixtime(unix_timestamp()) AS RUN_DATE
from (SELECT C.Claimnumber,
C.IncidentReport AS INCIDENT,
E.claimorder AS EXP_NUMBER,
to_date(C.createtime) AS Claim_Report_Date,
to_date(C.lossdate) AS Date_of_Loss,
to_date(C.closedate) AS Claim_Close_Date,
to_date(E.INITIALCLOSEDATE_AAA) AS EXP_ORIGINAL_CLOSE_DATE,
to_date(E.CLOSEDATE) AS EXP_CLOSEDATE,
to_date(E.REOPENDATE) AS EXP_REOPENDATE,
E.ReopenedReason AS EXP_REOPENREASON,
C.Description,
C.fault AS Insured_Lability,
C.LOSSCAUSE AS ACCIDENT_TYPE,
C.FAULTRATING AS FAULT_RATING,
C.LOSSCAUSE AS LOSS_CAUSE,
C.LOSSTYPE AS LOSS_TYPE,
C.LOBCODE AS LINE_OF_BUSINESS,
E.JURISDICTIONSTATE AS JurisdictionState,
ADR.STATE AS LOSS_STATE,
P.POLICYSTATE_AAA AS POLICY_STATE,
C.SIUSTATUS AS SIU_STATUS,
CONCAT(CT.FIRSTNAME, ' ', CT.LASTNAME ) AS CLAIMANT_NAME,
to_date(CT.DateOfBirth) AS CLAIMANT_DOB,
DATEDIFF (to_date(FROM_UNIXTIME( UNIX_TIMESTAMP())),to_date(CT.DateOfBirth))/365 AS Claimant_Age,
CT.Gender AS CLAIMANT_GENDER,
CT.MaritalStatus AS CLAIMANT_MARITAL_STATUS,
CT.OCCUPATION AS CLAIMANT_OCCUPATION,
E.STATE AS EXP_STATUS,
E.EXPOSURETYPE AS EXP_TYPE,
E.COVERAGESUBTYPE AS EXP_Coverage,
BP.COMPENSABILITYCOMMENTS,
I.HitandRun,
I.ID AS TOTAL_LOSS_ID,
V.STYLE AS VEHICLE_STYLE,
I.AmbulanceUsed AS Ambulance_Used,
I.DeathDate_AAA AS Death_Date,
I.DisabledDueToAccident AS DisabledDueToAccident,
GeneralInjuryType AS General_Injury_Type,
I.Impairment,
I.InjuredCheck_AAA,
BP.DetailedBodyPart AS Detailed_Body_Part,
BP.InjuryType_AAA AS Detailed_Injury_Type,
BP.Pre_ExistCond_AAA AS Pre_Exist_Cond
FROM
(SELECT id,Claimnumber,IncidentReport,createtime,lossdate,closedate,Description,fault,LOSSCAUSE,FAULTRATING,LOSSTYPE,LOBCODE,SIUSTATUS,LOSSLOCATIONID,POLICYID FROM CC_Claim WHERE RETIRED = 0) C
INNER JOIN (SELECT claimorder,INITIALCLOSEDATE_AAA,CLOSEDATE,REOPENDATE,ReopenedReason,JURISDICTIONSTATE,STATE,EXPOSURETYPE,COVERAGESUBTYPE,CLAIMID,INCIDENTID,ClaimantDenormID FROM CC_Exposure WHERE RETIRED = 0) E
ON C.ID = E.CLAIMID
LEFT JOIN CC_Incident I
ON E.INCIDENTID = I.ID
LEFT JOIN cc_bodypart BP
ON I.ID = BP.INCIDENTID
LEFT JOIN cc_contact CT
ON E.ClaimantDenormID = CT.ID
LEFT JOIN CC_ADDRESS ADR
ON C.LOSSLOCATIONID = ADR.ID
LEFT JOIN CC_VEHICLE V
ON I.VEHICLEID = V.ID
LEFT JOIN (SELECT id,POLICYSTATE_AAA FROM CC_POLICY WHERE RETIRED = 0 ) P
ON C.POLICYID = P.ID
WHERE C.claimnumber LIKE '1000-%'
AND C.incidentreport <> 1
AND C.lobcode = '10001'
AND C.losscause NOT IN ('10010', '10049')
AND upper(C.Description) not like'%TEST%'
ORDER BY C.CLAIMNUMBER ASC
) clminfo;What could be the possible issue??
Thanks
Mamta
Created 01-12-2016 07:09 PM
Digging through your SQL for some syntactical things that might possibly throw off beeline differently than the Hive UI. No promises, but a couple of things to check.
Always use "AS" for column aliases. You're missing an "AS" here:
case when LOSS_STATE=POLICY_STATE then '1' else '0' end PSEQLS,
If you're selecting from more than one table, always use the table alias in your select. You're missing one here:
GeneralInjuryType AS General_Injury_Type,
Let us know what you find. You might also try running your query through the hive CLI, too. Or running beeline in verbose mode.
Created 01-12-2016 06:34 PM
There is very high probablity that it's syntax issue.
Created 01-12-2016 07:20 PM
If Syntax issue, Then how it is working in Hue??
Created 01-12-2016 07:23 PM
Some kind of formatting while posting the query in beeline. Try with hive
hive -f /home/my/hive-script.sql
Created 01-12-2016 07:09 PM
Digging through your SQL for some syntactical things that might possibly throw off beeline differently than the Hive UI. No promises, but a couple of things to check.
Always use "AS" for column aliases. You're missing an "AS" here:
case when LOSS_STATE=POLICY_STATE then '1' else '0' end PSEQLS,
If you're selecting from more than one table, always use the table alias in your select. You're missing one here:
GeneralInjuryType AS General_Injury_Type,
Let us know what you find. You might also try running your query through the hive CLI, too. Or running beeline in verbose mode.