Hi, I'm CLEO! Something exciting is coming to the Community. Stay Tuned!
The Matrix Creator is an interesting multiple sensor hat that fits on a Raspberry Pi 3.
First step is to connect it, which is a simple snap, no soldering required.
The specs are pretty impressive:
- Xilinx Spartan 6 XC6SLX4 FPGA
- Amtel Cortex-M3 ATSAM3S2 Microcontroller
- 8 MEMS MP34DB02 audio sensor digital microphones
- ST LSM9DS1 3D accelerometer, 3D gyroscope, 3d magnetometer IMU
- ST HTS221 capacitive digital sensor for relative humidity and temperature
- NXP MPL3115A2 precision pressure sensor with altimetry
- Silicon Labs EM358X - 2.4 GHz IEEE 802.15.4 Zigbee
- Sigma Designs ZM5202 - 868/908/921 MHz ZWave
- Vishay TSOP573 - carrier 38.0 kHz IR Receiver
- Vishay VEML6070 UV light sensor
- NXP PN512 NFC reader
- Everloop 35 RGBW LEDS
It runs on Raspian lite and installs via:
curl https://matrix-io.github.io/matrix-documentation/install.sh | sh
Our Apache NiFi Flow For Processing the Three Types of Data
Our Versioned Apache NiFi and MiniFi Flows
We tail the three files produced by the three example Python sensors readers
Both our MiniFi and Apache NiFi flows are very simple and documented above. Tail data from files as Python writes it, send from MiniFi to Apache NiFi which separate the files into different flows for future processing. We could create schemas, convert to JSON, merge the feeds with JSON, store them in three different data stores or more depending on what you want to do. This can be one on the edge or in Apache NiFi on a cluster. You could have MiniFi or NiFi trigger off specific values or ranges as they need arises. Or like me, you can just store it for later use in your endless HDFS Data Lake.
Using Three Existing Examples
Getting Temperature, UV and IMU Values.
python /home/pi/matrix-creator-malos/src/python_test/test_humidity.py
nohup ./humidity.sh &
fh = open("/opt/demo/logs/humidity.log", "a")
fh.writelines('{0}'.format(humidity_info))
fh.close
python /home/pi/matrix-creator-malos/src/python_test/test_uv.py
/opt/demo/logs/uv.log
python /home/pi/matrix-creator-malos/src/python_test/test_imu.py
/opt/demo/logs/imu.log
/Volumes/seagate/Apps/minifi-toolkit-0.3.0/bin/config.sh transform $1 config.yml
scp config.yml [email protected]:/opt/demo/minifi-0.3.0/confExample Data
imu.2603753-2604002.log yaw: 141.655654907 roll: 1.66126561165 accel_x: -0.0261840820312 accel_y: 0.0283813476562 accel_z: 0.978576660156 gyro_x: -0.0672912597656 gyro_y: 2.06359863281 gyro_z: 1.33087158203 mag_x: 0.23982000351 mag_y: 0.189700007439 mag_z: -0.480480015278 uv.172512-172528.log oms_risk: "Low" humidity.29015-29074.log temperature: 21.9526348114 temperature_is_calibrated: true
References:
- https://medium.com/kkbankol-events/raspberry-pi-15662c3ca881
- https://creator.matrix.one/#!/examples
- https://github.com/matrix-io/matrix-creator-malos/blob/master/docs/pressure.md
- http://community.matrix.one/t/how-to-record-with-pyaudio/357
- https://matrix-io.github.io/matrix-documentation/matrix-core/examples/pytests/
- https://github.com/matrix-io/matrix-creator-alexa-voice-services
- https://matrix-io.github.io/matrix-documentation/matrix-hal/getting-started/installation/
- https://matrix-io.github.io/matrix-documentation/matrix-core/examples/pytests/
- https://matrix-io.github.io/matrix-documentation/setup/
- https://www.matrix.one/products/creator
