I was able to resolve it .
if you see error with ntptime mostly kudu service will go down , so you have to restart ntpd and then this error will go .
[root@wcw0hd3dn02 ~]# ntptime
ntp_gettime() returns code 5 (ERROR)
time dce7466c.fc37b000 Sun, Jun 11 2017 0:32:44.985, (.985225),
maximum error 16000000 us, estimated error 16 us, TAI offset 0
ntp_adjtime() returns code 5 (ERROR)
modes 0x0 (),
offset 0.000 us, frequency 0.000 ppm, interval 1 s,
maximum error 16000000 us, estimated error 16 us,
status 0x4041 (PLL,UNSYNC,MODE),
time constant 7, precision 1.000 us, tolerance 500 ppm,
this error comes if you run ntp with -x option
[root@wuwcw0hd3mn01 ~]# ps -ef|grep ntp
root 3183 2731 0 10:38 pts/0 00:00:00 grep ntp
ntp 20736 1 0 Jun13 ? 00:00:19 ntpd -x -u ntp:ntp -p /var/run/ntpd.pid -g
remove -X from belwo file and restart ntp
[root@wuwcw0hd3mn01 ~]# more /etc/sysconfig/ntpd
# Drop root to id 'ntp:ntp' by default.
OPTIONS="-x -u ntp:ntp -p /var/run/ntpd.pid -g"
wait for ntp to synchronize ,after that i didnt see any issue in kudu service so far.
ntp_gettime() returns code 0 (OK)
time dcf260c3.66c6abfc Mon, Jun 19 2017 10:40:03.401, (.401469911),
maximum error 394157 us, estimated error 345 us, TAI offset 0
ntp_adjtime() returns code 0 (OK)
modes 0x0 (),
offset -707.277 us, frequency 20.094 ppm, interval 1 s,
maximum error 394157 us, estimated error 345 us,
status 0x6001 (PLL,NANO,MODE),
time constant 10, precision 0.001 us, tolerance 500 ppm,
check this https://access.redhat.com/solutions/38542
Thank you @MSharma for updating us on your findings!
That is very interesting. It sounds like you enabled NTP stepping (which -x disables) whereas before it could only use slewing. Apparently stepping has kept you from falling too far out of sync from the time source for Kudu to tolerate.
I just checked and on one of the more long-lived and stable test environments I periodically use (note: it is NOT a production system) where I have run many different versions of Kudu over the years I do not have -x set in OPTIONS. On that machine (running CentOS 6.6) there is only the following in /etc/sysconfig/ntpd:
# Drop root to id 'ntp:ntp' by default. OPTIONS="-u ntp:ntp -p /var/run/ntpd.pid -g"
It may be worth noting that this machine also has the following set in /etc/ntp.conf:
# tinker panic 0 instructs NTP not to give up if it sees a large jump in time. # This is important for coping with large time drifts and also resuming virtual # machines from their suspended state.
tinker panic 0 # Permit time synchronization with our time source, but do not # permit the source to query or modify the service on this system. restrict default kod nomodify notrap nopeer noquery restrict -6 default kod nomodify notrap nopeer noquery # Drift file. Put this in a directory which the daemon can write to. # No symbolic links allowed, either, since the daemon updates the file # by creating a temporary in the same directory and then rename()'ing # it to the file. driftfile /var/lib/ntp/drift
I can't tell you whether or not this is an ideal NTP configuration, or whether it is fully correct, but it seems stable.
For those who want more insight into what -x and slewing means, I'd recommend looking at the ntpd(8) man page and doing a Find for the keyword "slew": https://linux.die.net/man/8/ntpd
For those having problems with NTP stability in general, also consider reading through the "NTP Debugging Techniques" section of the Official NTP Documentation: http://doc.ntp.org/4.2.6p5/debug.html
I spent some time looking into this and agree that running ntpd with the '-x' option will make Kudu crash (likely after 8 hours and 53 minutes based on my math). I wrote some details here:
Is that mean i need to broke all my production servers and give it special treatment by enabling stepping to get Kudu working for me?
Seems we are so far to go with it to our production, i'm using it in our test enviroment.